TC2500

Auxiliary Transmission for 25000 N-m Input Torque

TC2500 Transfer Case is a Two Speed Transfer case connected after Gearbox. Depending upon the requirement Driver can select either Low Range (OFF High way application) or High Range (ON Highway application).

    Features & Benefits :
  • Advanced system lubrication using a bi- directional forced pump
    and internal baffles
    • Greatly reduced oil change intervals and lower operating temperature
  • Ground Helical Gears
    • Minimize noise and greater strength
  • Maximum Engine Power 530 HP
    • Intended for the market of higher torque power trains
  • Input Speed rating up to 3000 rpm
    • Allows usage of overdrive transmissions
  • Integral air actuated three- position high low/range shift unit
    • Reliable shifting provision for a manual neutral position
  • Compact design
    • Optimum packaging for space constrained applications
    Technical Specifications :
  • Engine power range: 235 to 530 HP
  • Max engine torque: 25000 Nm
  • Max input speed: 3000 rpm
  • GVW(ton): 16 to 52
  • Transmission: Manual/automatic
  • Differential: Mandatory/optional
  • Differential ratio: 72/28, 50/50
  • TC speed: Two Speed (High & Low)
  • Gear Ratios:
    Shallow Version: Low-1.52, High - 0.89
    Deeper Version: Low-2.44, High - 1.09
  • PTO: Provision
  • Auxiliary pump: Provision
  • Centre distance: 396 mm
  • Weight: 400 Kg
  • Shift system: Pneumatic (high, low, neutral)
  • Dimension (LxBxH): 700mm x 420mm x 685 mm
  • Application: MPV, Defence Vehicles
  • Lubrications: Forced
  • Vehicle applications: 4x4, 8x8, 10x10, 12x12
  • Propeller shaft angle limits:
    +/- 6 degree at Input
    +/- 12 degree at front output
    +/- 12 degree at rear output
  • Speedo Sensor: Contactless
  • Indicator Switches:
    For High, Low & diff-lock.
    All are with Bayonet type end connector

TOP